The working process of straw packing machine

The object of straw packing machine for polypropylene beverage straws, packaging materials used for BOPP, PET, etc., can be heat sealed water pipe by the packing arrangement of type decorate, evenly spaced, connected the two hose among all passes through the continuous cutting, this can be in a certain number of rolls around, and can more easily single tear, the analysis of straw packing machine working principle should be: double plastic film in Heating under the state of sealing, cutting and composite forming. According to the working requirements, the straw packaging machine should have the functions of straw storage and delivery, packaging film delivery, horizontal sealing, and longitudinal sealing finished product output, etc., and the straw storage and delivery of the beverage tube packaging machine。 The following is an introduction to the straw packing machine。

Here is the content list:

l The advantages of paper straw packaging machine

l The background technology of straw packing machine

l The working process of straw packing machine

The advantages of paper straw packaging machine

Paper straws involve a used to drink the drink, nutrition, health care, and medicinal oral liquid and other various drink straws for automatic counting, automatic packaging of straw packing machine, including the body, the body has a storage hopper, sending material into thin-film bag material for institutions, thin membrane transport to charge a film for institutions and the film sealed bag sealing and cutting machine. Because to adapt the structure of this practical new-type packing straw, will be packed to count the straws placed within the storage hopper, by collating institutions (copy onboard and the copy board) automatic plastic lined up and was sent to the straw packing machine to install, thin-film by a film for institutions to packers has plastic lined up a good straw filling to established a good film, Then through the sealing and straw packing machine structure sealing, cutting and realize the automatic packaging of straw. The utility model has high packing efficiency, the human body does not touch the suction tube, does not have any secondary pollution, can effectively prevent cross-infection, and can completely meet the needs of the straw packing machine.

The background technology of straw packing machine

At present, there are many kinds of straw packing machines for drinks, nutrition and health drinks, and medicinal oral liquid, but as a complete set of straws used with drinks, nutrition, and health products and medicinal oral liquid and other drinks, most of the domestic artificial packaging. In the process of packing, almost every straw should be in contact with human hands, which is easy to cause cross-infection and threaten people's health. Straw packing machine violates the original intention of nutritional health care, disease prevention and treatment of drinks, nutritional health care products, and medicinal oral liquid, and does not meet the requirements of the Food Hygienic Law and other regulations. On the other hand, the production efficiency of manual counting and packaging is low, which requires a large number of human resources. It is estimated that a small factory producing 1 million straws a day would require about 10 full-time bagging workers.

The working process of straw packing machine

The straw to be counted is placed in the storage hopper 1, through the reciprocating copying of the upper copy board 4 and the lower copy board 3, so that the straw flows into the row groove 6 in the queue, the counting and discharging of the straw packing machine is accomplished by the coordinated action of the counting board 5 and the feeding board 8; The number of straw packing machine is realized by adjusting the gear 9 to drive the two adjusting screw 7, and adjusting the relative position between the counting plugboard 5 and the feeding plugboard 8. Under the action of the finishing mechanism, the straw packing machines are automatically shaped and queued up, and sent to the packing station to be installed. The film 18 is sent to the packing station by the film feeding mechanism. After counting and checking, the shape-lined straw packing machines are patted together by the patting mechanism and filled into the formed film, and then sealed and cut through the sealing and cutting machine structures 13, 15, and 21. At the same time, driven by cylinder 25, the main support plate 24 drives the film down along the guide rod 23 to the packing position, and then the main support plate 24 and the sealing and cutting straw packing machine are reset under the action of the cylinder. This cycle is to achieve automatic packaging straw.

It is the responsibility of each manufacturer to produce an angle steel straightening machine that meets the standards Hangzhou Fuyang Sunrise Machinery Co., Ltd. conducts many tests on straw packing machines before they leave the factory, and the quality qualification rate is guaranteed. If you are in the straw packing machine business, you can consider our cost-effective products.