Article List

• New arrival - Full Automatic Individual Straw Packing Machine LG-58YS

  Full Automatic Individual Straw Packing Machine LG-58YS is our latest servo-controlled packaging machine with printing.

  Exhibition October 10, 2020
• How to Control PLA Straw Diameter, Wall Thickness, and Length During Extrusion

  Straws that are 0.3 mm thicker waste resin for each and every piece produced. Straws that are 0.3 mm thinner crumble under the first contact with a milkshake.

  Tech Center October 13, 2026
• Paper Straw Packing Machine Specifications to Confirm Before Requesting a Quote

  Not specifying your requirements when ordering a paper straw packing machine is the quickest way to encounter downtime, machine jams, and packaging size mismatch. Regardless of whether your application requires individual packaging at high speeds or bulk bags for retail,

  Tech Center October 13, 2026
• Utilities and Workshop Requirements for a PLA Straw Production Line

  New lines of PLA straws do not normally encounter problems with the machinery. They encounter problems with the facility around the machinery.You buy a brand new extrusion line, and you’re expecting it to arrive on time, but when you install it, you realize the workshop lacks three-phase power,

  Tech Center October 13, 2026
• How To Choose A Paper Straw Packing Machine for Supermarkets, Restaurants, And Food-Service Chains

  Depending on the kind of operational environment, the kind of requirements to be met differs, thus varying the procedure of purchasing a paper straw packing machine based on whether you have a large-scale supermarket, an active restaurant, or a large food-service chain. In this article,

  Tech Center October 13, 2026
• PLA vs. PP vs. PHA Straw Machines: How Material Choice Affects Production

  While two factories might operate identical straw extruders at the same line speed, they might have drastically different results when it comes to their output, scrap rate, and the quality of product.

  Tech Center October 13, 2026
• How Sensors Improve Counting and Position Control in Individual Straw Packing

  Despite being fast, a straw packing line will only be costly if it continues to pack air rather than straws. Speed is not enough, but speed coupled with precision matters.

  Tech Center October 13, 2026
• Paper Straw Packing Capacity: How to Match Speed With Upstream Production

  In order to optimize return on investment and avoid manufacturing constraints, ensuring the alignment between your paper straw packing rate and the output of your previous stage is key. This article will walk you through the process of matching your packing capacity to your output,

  Tech Center October 13, 2026
• Individual Straw Packing vs. Group Packing: Which Format Fits Your Orders?

  In other words, your straw can be packed in two vastly different formats depending on how you choose to sell it, and both will have an effect on your bottom line, your line speeds, and your ability to sell to certain customers. Some customers will require each straw individually wrapped.

  Tech Center October 13, 2026
• Common Paper Straw Packing Defects During Long Production Runs and How to Prevent Them

  Your packing line is flawless at 8 a.m. - the first-piece check, film runs perfectly, and counts are right on point. But six hours go by, and you notice rejects appearing; the seal is off, and you cannot pinpoint exactly when and where.A familiar scenario?

  Tech Center October 13, 2026