Use method of straw packing machine

Straw packing machine configuration: single straw packaging machine is a three-side edge sealing, a bag containing a straw, with two-color printing, automatic glue, quantitative counting, automatic drying, and other functions. The following is an introduction to straw packing machines.

Here is the content list:

•  What are the classification types of packaging machinery?

•  Use method of straw packing machine

•  The practicability of PLA degradable straws

What are the classification types of packaging machinery?

The commonly used classification method is classified according to the packaging process, which can be divided into main packaging machinery and auxiliary packaging machinery. The straw packing machine for wrapping, filling, filling and other packaging processes is called the main packaging machinery, or the straw packing machine. Packaging machinery that completes washing, drying, testing, sealing, measuring, conveying, and stacking is called straw packing machine.

Use method of straw packing machine

Power on: according to the need to flip the power selection switch, that is, the power indicator light. The straw packing machine is vacuum sealing, pointing vacuum charging is vacuum filling sealing. Place plastic bags containing items in the vacuum chamber. The mouth of the bag shall be placed neatly on the heat seal (at least one nozzle shall be inserted into the mouth of the bag for inflatable packaging).

Press down the cover, and the exhaust (vacuum) indicator light on the panel is on. When the vacuum pump starts pumping, the straw packing machine is automatically sucked. The straw packing machine can adjust the vacuum degree according to the packaging requirements. When adjusting, the range should be small according to the scale from low to high.

When the exhaust reaches the set time (that is, the required vacuum degree), the exhaust is over, the exhaust indicator light is off, and the inflation indicator light is on, indicating the beginning of the inflation. The inflating knob can adjust the inflating time (that is, the amount of inflating). The method is the same as above. If it is not necessary to inflate, turn the power switch to the vacuum position, the program will automatically enter the vacuum package, and the inflating indicator light will go off.

The straw packing machine is equipped with a heat-sealing time and temperature adjustment knob to adapt to different thickness materials. When adjusting time and temperature, the rotation amplitude should be small to prevent the sudden increase of heat-sealing temperature and burn out the heat-sealing accessories.

When the set heat sealing time is reached, the heat-sealing indicator light goes off, and the heat-sealing ends with apparent heat sealing, that is, the vacuum chamber enters the atmosphere through the solenoid valve until the cover is automatically lifted, the vacuum filling packaging process is finished, and the next packaging cycle is ready.

The practicability of PLA degradable straws

PLA straw packing machine has a good biodegradable performance, degradation to generate CO2 and H2O, no pollution to the environment, can meet the needs of industrial compost. The straw after high-temperature extrusion has good thermal stability and good solvent resistance. Straw packing machine’s product glossiness, transparency and feel properties can replace petroleum-based products. The physical and chemical indexes of the straw packing machine can meet the requirements of food safety regulations around the country. Therefore, it is widely used and can adapt to the demand for most drinks in the current market.

It is the responsibility of each manufacturer to produce straw packing machines that meet the standards. Hangzhou Fuyang Sunrise Machinery Co., Ltd. conducts many tests on straw packing machines before they leave the factory, and the quality qualification rate is guaranteed. If you are in the straw packing machine business, you can consider our cost-effective productions.