Views: 0 Author: Site Editor Publish Time: 2022-06-20 Origin: Site
The paper straw produced by the paper straw packing machine uses food-grade virgin wood pulp paper as the main raw material, and its production process is processed by three or four-layer food-grade raw paper with glue, tube winding, slitting, drying, and other steps.
Here is the content list:
1. Prepare the raw materials for the paper straw packing machine -paper tape
2. Wipe the cleansing oil on the bottom paper of the paper straw packing machine
3. Prepare the adhesive for the paper tape after the paper straw packing machine
4. Docking the paper straw packing machine with household appliances
5. Connect the compressed gas pipe of the paper straw packing machine
The paper straw packing machine manufacturer believes that the processed cardboard paper should be divided into specifications and models of total width paper tapes, and then various standard total width paper tapes are placed on the paper supply wall so that the paper straw packing machine will operate afterward. During the whole process, the paper tape can be led out through the upper edge of the paper tray and wound onto the fixed mandrel through the waxing roller.
Afterward, the bottom paper tape will rotate with the fixed core axis of the laser cutting head with the inner hole, because the fixed core shaft is in a static state throughout the whole process, so people can lower the paper tape. Follow the friction that occurs in the middle of the rotation, and wipe the bottom layer of paper with an appropriate smoothing oil.
Naturally, in addition to the first paper tape that requires wiping and polishing oil, some paper tapes afterward require the use of some adhesives. In these respects, we require the termination of preparation before running the paper straw packing machine. Generally, the above selection some quick-drying organic chemical batters are used as the adhesive in the whole process of the paper straw packing machine. Nowadays, glacial acetic acid high-pressure polyethylene is mostly used as the adhesive in the paper straw packing machine.
After some external props are prepared in advance, people can connect the paper straw packing machine to the level of household appliances. After the three-phase power supply is first connected, the paper straw packing machine will terminate the full-load test run, and then the paper straw to terminate the identification of the rotation direction of the motor, it must be in the proper rotation direction. After the high speed is over, people can terminate the conditioning of the resistor on the control board, and let the engine of the paper straw packing machine start to stop running.
Because the paper straw packing machine generally uses tightening gas to terminate the cutting work of the cutter head, the internal part is completely equipped with all the gas pipelines of the previous weapons and equipment. People only require the additional pneumatic valve to be received. The upper side of the air inlet can be used, and then the required gas working pressure can be terminated for conditioning so that the paper straw packing machine can terminate all normal actual operations.
It is the responsibility of each manufacturer to produce a paper straw packing machine that meets the standards, to ensure the healthy development of the paper straw packing machine market. Hangzhou Fuyang Sunrise Machinery Co., Ltd. conducts many tests on paper straw packing machines before they leave the factory, and the quality qualification rate is guaranteed. If you are in the paper straw packing machine business, you can consider our cost-effective products.
