Views: 2 Author: Site Editor Publish Time: 2022-01-13 Origin: Site
With the development of society and the improvement of people's living standards, more and more flexible packing, plastic bottles and carton canned beverages, and nutrient oral liquids enter the market. Therefore, a variety of corresponding straws are needed in the market to meet people's consumption needs, and there are also higher requirements for the packing specifications of the straws. Next, let’s talk about the conveying and control, and monitoring system of the straw packing machine.
Here is the content list:
Conveyor of packing straw belt
Control and detection system
The two rolls of packing film before heat sealing are dragged by the heat sealing wheel and heat-sealed into a straw packing tape. The straw packing machine is dragged by the conveyor belt so that it is cut according to the length of the package through the slitting wheel. The speed of the conveyor belt is slightly higher than the circumferential speed of the heat-sealing wheel. The straw packing machine is then conveyed to the cross-cutting device by the stepping and advancing mechanism, and then divided into the required straw packing finished products. There is a tape accumulation section between the stepping and advancing mechanism and the conveyor belt to buffer the intermittent of the stepping and pushing mechanism.
The control and monitoring system of the straw packing machine includes operating parts, temperature control system in the heat sealing system, counting and packing system in the crosscutting system, blanking monitoring system, and speed control system.
Before starting the straw packing machine, start the heating system of the heat sealing system. After the temperature reaches the preset film heat sealing temperature, and the straw conveying system and the film conveying system are in normal conditions, the main motor power supply is switched on. During normal operation, when the temperature of the heat sealing wheel will automatically control the preset temperature range, if the temperature is too high or too low, it will automatically alarm and stop; if the straw delivery system is abnormal, it will automatically alarm and be timely Shutdown; the counting system in the cross-cutting and dispensing system automatically calculates and displays the number of straw packing, and each time the preset dispensing number (such as 100 packs or 500 packs, etc.) is reached, the straw will be divided into different packing In the box. In addition, corresponding monitoring parts can be added according to the requirements of users, such as overload alarm and so on.
Since the heat-sealing wheel has a large heat capacity and is rotating, the location of the thermistor and the preset temperature are determined by factors such as film material, working speed, and environment, which are determined by experiments during the development process.
Hangzhou Fuyang Sunrise Machinery Co., Ltd. has developed a variety of straw packing machines and conducted a lot of tests before leaving the factory to ensure quality. This straw packing machine not only has a large exhaust capacity but also has strong endurance. If you are in the straw packing machine business, you can consider using our cost-effective products.
