Views: 0 Author: Site Editor Publish Time: 2021-08-14 Origin: Site
The drinking straw machine adopts a CNC computer numerical control system, SMS synchronous mobile tracking cutting device, and imported servo drive, which can greatly reduce the resistance of the cutter to the paper tube during the cutting action, and make the gap of the paper tube uniform. The blade of the drinking straw machine adopts the imported single-circular knife cutting design, and the fully CNC-driven cutter (not cylinder-driven) realizes precise cutting. The ultra-quiet design of the transmission part of the paper tube machine improves work efficiency! Next, I will introduce the drinking straw machine from three aspects.
What are the safety rules for using a drinking straw machine?
What is the development trend of drinking straw machines?
What is the industry application of drinking straw machines?
1. Wear personal protective equipment properly. What should be worn must be worn, and what should not be worn must not be worn. For example, female workers are required to wear protective caps during paper tube machining. If they do not wear protective caps, they may twist their hair in the drinking straw machine. At the same time, it is required not to wear gloves. If they are worn, the rotating part of the drinking straw machine may twist the gloves in and cause the hands to be twisted.
2. The paper tube machinery and equipment should also undergo safety inspections by regulations during operation. Especially to see if the fastened objects are loose due to vibration so that they can be fastened again.
3. The paper tube machinery and equipment should be inspected for safety before the operation, and the car should be run empty. After confirming that it is normal, it can be put into operation.
1. From the perspective of the working model of the paper tube machine, in the relay control circuit, when the power is turned on, all the relays in the circuit are in a restricted state, that is, the relays that are pulled in are all pulled in at the same time, and they should not be pulled in. Relays are restricted by certain conditions and cannot be closed. This kind of working mode is called parallel working mode. The PLC user program is cyclically executed in a certain order, so all the soft relays are in the periodical cycle scanning on. The action sequence of each relay subject to the same condition is determined by the program scanning sequence. This working method is called the serial Way of working. 2. From the point of view of the control method of the drinking straw machine, the control logic of the electrical control system adopts hardware wiring and uses the series or parallel combination of the relay mechanical contacts to form the control logic. The PLC uses computer technology, and the drinking straw machine control logic is stored in the memory in the form of a program. To change the control logic, only the program needs to be changed, so the drinking straw machine is easy to change or increase system functions.
The beverage industry's attention to aseptic cold filling production lines has reached a new height, and drinking straw machine has become an inevitable trend for beverage manufacturers to adopt aseptic cold filling equipment.
The investment cost of the aseptic cold filling production line has always been a concern of the beverage industry. As equipment suppliers continue to reduce equipment costs, the investment cost of the aseptic cold filling production line paper tube machine has been reduced to 1.5 to that of the hot filling line. 1.6 times and domestic suppliers of aseptic cold-filling production lines for paper tube machines have also become more mature.
Sunrise machinery has developed a variety of drinking straw machines and conducted a lot of tests before leaving the factory to ensure quality. If you are in the drinking straw machine business, you can consider using our cost-effective products.
